Image de diaporama
Advanced Search
» »
» D2 SILOXANE PAINT - 20 KG
D2 SILOXANE PAINT - 20 KG
See larger image

D2 SILOXANE PAINT - 20 KG

Reference -PROD2SIL20K
Rating :0 review
210,00€ Excl. vat

D2 siloxane resin-based matt paint.

20 KG BUCKET

Quantity :
+
-
Available

Color

* Color Chart

Add to cart
Ask an estimate

Free shipping from 2000 € HT on thermal insulation accessories, 150 € HT on hardware, from 500 € HT for other categories

Description
Notice

Shipment within 5 to 7 days 

 

Description of the D2 siloxane resin-based matt paint : 

 

  • For exterior use, new or renovation on all vertical surfaces of the building and on the underside, bare or coated with old adherent paint in good condition.
  • On concrete and prefabricated derivatives, rough masonry or masonry coated with traditional cement mortar (except Tyrolean and strong reliefs) or single-coat hydraulic coating, bricks, stones.

Strong points of D2 matt paint based on siloxane resin :

 

  • Good resistance to UV and weathering
  • Impervious to run-off water
  • Good filling on old RPE


Application of D2 Siloxane Resin Matt Paint :

 

  • The substrates must comply with the relevant DTUs and in particular with DTU 59.1. 
  • Prior recognition is necessary in order to determine the most suitable preparation for their condition and nature (cleaning, washing/rinsing, sanding, scraping, degreasing, dusting, etc.). 
  • Substrates contaminated by moss, algae or fungi must first be treated with an anti-cryptogamic solution (algaecide and fungicide) in accordance with the manufacturer's instructions, followed by a HP rinse to remove any remaining residues.
  • Substrates with saltpetre should be treated by brushing. Wherever possible, the cause of the saltpetre should be removed to prevent its recurrence.
  • In general, after preparation, substrates must be sound, cohesive, normally absorbent, clean and dry to receive a first coat of D2 SILOXANE diluted with 5% water before the application of one or two coats of undiluted D2 SILOXANE.

 

  • On old unformed concrete, prefabricated concrete with low absorbency or traditional hydraulic plaster or single-layer porous, powdery or old Pliolites® with a high flour content, after preparation: apply a coat of 180-250g/m² of solvent-based acrylic fixative, before applying two coats of D2 SILOXANE.
  • On normally absorbent substrates made of concrete, hydraulic plaster, bare or coated with old adherent paint in good condition, with little or no chalking: after preparation, apply one coat of 200-250g/m² of PROMUREX IMPRESSION, before applying two coats of D2 SILOXANE.
  • On walls insulated with a thin coating on expanded polystyrene (ETICS) presenting type I disorders, after preliminary study for any surface greater than 250m² and over R+2, preparation with in particular a decontamination of the surfaces, application of a coat of D2 SILOXANE diluted with 5% water before the application of one to two coats of D2 SILOXANE undiluted.
  • On old single layer scraped coatings, after preparation, apply one coat of 200 to 250g/m² of PROMUREX IMPRESSION, before applying two coats of D2 SILOXANE.


Yield of D2 siloxane resin-based matt paint :

  • 200 to 250g/m² coat 


D2 Siloxane resin-based matt paint packaging:

  • 5 kg or 20 kg bucket

 

Back to top
Description
Notice

Reviews about this D2 SILOXANE PAINT - 20 KG (0 reviews)

There is no review for this item.
Back to top