D2 ACRYLIC PAINT- 20 KG

Shipment within 5 to 7 days 

D2 paint, with a matt appearance, based on acrylic copolymers in aqueous phase: 

• The substrates must comply with the relevant DTUs and in particular with DTU 59.1. 
• Prior recognition is necessary in order to determine the most suitable preparation for their condition and nature (cleaning, washing/rinsing, sanding, scraping, degreasing, dusting, etc.). 
• Substrates contaminated by moss, algae or fungi must first be treated with an anti-cryptogamic solution (algaecide and fungicide) in accordance with the manufacturer's instructions, followed by a HP rinse to remove any remaining residues. Substrates with saltpetre should be treated by brushing. Where possible, remove the cause of the saltpetre to prevent its recurrence.
• On old, unformed concrete, prefabricated concrete with low absorption or traditional hydraulic plaster or single-coat porous, powdery or old, flaky Pliolites®, after preparation: apply a coat of 180-250g/m² of solvent-based acrylic fixative, before applying two coats of D2 ACRYL.
• On normally absorbent concrete substrates, hydraulic renderings, bare or coated with old adherent paints in good condition, with little or no chalking: after preparation, apply one coat of 200 to 250g/m² of PROMUREX IMPRESSION, before applying two coats of D2 ACRYL.
• On old single coat scraped renderings, after preparation, apply one coat of 200 to 250g/m² of PROMUREX IMPRESSION, before applying two coats of D2 ACRYL 

Output of D2 Paint, matt appearance based on acrylic copolymers in water phase : 

• 200 to 250g/m² layer

Packaging of D2 paint, with a matt appearance based on acrylic copolymers in a watery phase : 

• Paint bucket: 20KG